PCM-6893 comes with a CD-ROM which contains most of drivers
and utilities your will need.
There is several installation ways depends on the driver package
under different Operating System application.
We recommend that the system driver installation
procedure must be performed first.
If you utilize Windows NT series OS, you are strongly recommended
to download the latest version Windows NT Service Pack from
Microsoft website and install it before installing any driver.
4.1 Installation 1:
Applicable for Windows 98/2000/XP
1. Insert the PCM-6893 CD-ROM into the CD-ROM Drive.
2. From the CD-ROM, select the desired component Driver folder;
select the desired Operation System folder to double click on the
Setup.exe icon. A driver installation screen will appear.
(Notice: take VGA driver installation under Windows 98 for
example, choose the corresponding folder depending on
your OS)
3. A driver installation screen will appear, please follow the
onscreen instructions to install the driver in sequence and click
on the Next button.
(Notice: In some cases the system will ask you to insert
Windows 98 CD ROM and key in its path. Then click on
the OK button to key in path.)
4. Click on the Finish button to finish installation process. And
allow the system to reboot.
To Next Page
Loading...
