4.2 Installation 2:
Applicable for Windows 98/2000/XP
1. Insert the PCM-6893 CD-ROM into the CD-ROM Drive.
2. Click on Start button, select the Settings, and then click on the
Control Panel icon.
3. Double click on the Add/Remove Hardware icon and Add
New Hardware Wizard will appear. Click on the Next button.
4. Select Search for the best driver for your device
(Recommended) and click on the Next button.
5. Select Specify a location, click on Have Disk button then key
in the CD-ROM path and specify component drivers and OS
folders. Then click on the Next button.
6. The Wizard shows that Windows driver file search for the
device. Click on the Next button.
7. The system will ask you to insert Windows 98 CD-ROM. Click
on the OK button to insert CD-ROM and key in path.
8. Click on the OK button.
9. Click on the Finish button to finish installation process. And
allow the system to reboot.
To Next Page
Loading...
