25
8.3.
Setting Example
To set auto power-off function to “Enabled”, and the ACAI function to “Disabled”.
1. Press and hold the SAMPLE key to display func .
2. Press the PRINT key to display poff 0 .
3. Press the RE-ZERO key to display poff 1 .
4. Press the SAMPLE key several times to display
aCai 1 .
5. Press the RE-ZERO key to select aCai 0 .
6. Press the PRINT key to store the parameters.
Unit appears after end .
7. Press the UNITS key to turn the balance off.
func
poff 0
poff 1
aCai 1
Press and hold
To confirm
To store
aCai 0
end
Unit
The balance turns off.
Each pressing switches
the parameter
Each pressing switches
the parameter
To Next Page
Loading...
