28
Class Item
Param-
eter
Description
func
Hold
Display hold function
0 Disabled d = readability (scale interval or
“division”)
Hold: Holds stable weight values
except in the zero band.
When the value changes more than
the limit, the display hold is canceled.
1 Hold. Limit : ±10d
2 Hold. Limit : ±50d
3 Hold. Limit : ±100d
4 Hold. Limit : ±200d
totl
Accumulation function
0 Disabled
1 Enabled
ltUp
LCD backlight control
0 Always off
To control how the LCD
backlight turns off after the
STABLE indicator turns on.
Weight changes or key
operation will turn the
backlight on.
1 Turns off after 5 seconds
2 Turns off after 10 seconds
3 Turns off after 30 seconds
4 Turns off after 60 seconds
5 Always on
Unit
Weighing units to be
displayed
Sets to display units
Refer to “8.4. Storing
Weighing Units”.
id ID number for GLP output Sets the ID number
Refer to “10. ID NUMBER
AND GLP”.
: Factory setting
*
:
When the AD-8127/AD-8121B format is selected, the interval between continuous data
is 1.6 seconds regardless of the setting “pU5e”.
**
:
Even if the weight display is “5d”, the sample weight may not be accepted. This is
because the weight display data is rounded off internally.
To Next Page
Loading...
