A&D EJ-303 - Power ON;OFF and Auto Power-off

7
Total indicator Measurement in air
for specific gravity
M+ indicator
Measurement in water
ACAI indicator for specific gravity
Battery indicator Density (Specific gravity)
Hold indicator
STABLE indicator
NET indicator
ZERO indicator
Turns the power ON or OFF.
Switches the weighing units and modes.
Clears the display to zero (zero and tare).
Weighing mode (EJ-54D2 only):
Changes the weighing range (when “rng 0” is selected.)
pcs mode: Enters the sample unit weight storing mode.
% mode: Enters the 100% weight storing mode.
Accumulation mode: Adds the weight value to total.
Held down to enter the function setting mode.
Outputs the weight value to a printer or personal computer.
Stores a unit weight, 100% weight or other setting values to the balance.
Weighing units
STABLE
NET
ZERO