AAON MODGAS-XWR2 - Force Valves Screens

32
MODGAS-XWR2 Technical Guide
LCD SCREENS
Force Valves Screens
Force Valves Screens
Refer to the following map when navigating through the
Force Valve Screens. From the FORCE VALVE Screen, press
<ENTER>. At the V1 and V2 FORCE ON/OFF screens, press
the <UP> arrow key to turn the FORCE MODE on and press the
<DOWN> arrow key to turn the FORCE MODE o. Use the <UP>
and <DOWN> arrow keys to increase and decrease the percentage.
FORCE
VALVES
STAGE 1
FORCE ON
STAGE 1 FORCE ON/OFF
Press the <UP> button to turn the Force Mode on. Press the
<DOWN> button to turn the Force Mode o󰀨.
V1 POSITION
X%
FORCE VALVE 1 PERCENTAGE
This screen only appears when Force Mode is on.
Press the <UP> button to increase the percentage.
Press the <DOWN> button to decrease the percentage
NOTE: When you turn the Force Mode back o󰀨 or after 10 minutes
of no keypad input, the valve will reinitialize to zero and the relays
will turn o󰀨.
STAGE 2
FORCE ON
STAGE 2 FORCE ON/OFF
Press the <UP> button to turn the Force Mode on. Press the
<DOWN> button to turn the Force Mode o󰀨. If the screen says
DISABLED, the ON/OFF selection is not possible.
V2 POSITION
X%
FORCE VALVE 2 PERCENTAGE
This screen only appears when Force Mode is on.
Press the <UP> button to increase the percentage.
Press the <DOWN> button to decrease the percentage
NOTE: When you turn the Force Mode back o󰀨 or after 10 minutes
of no keypad input, the valve will reinitialize to zero and the relays
will turn o󰀨.
STAGE 3
FORCE ON
STAGE 4
FORCE ON
STAGES 3 and 4 FORCE ON/OFF
These screens allow each stage to be forced on or o󰀨. Press the
<UP> button to turn the Force Mode on. Press the <DOWN>
button to turn the Force Mode o󰀨.