Aastra Ascotel IntelliGate 150 - Interface Access

Ascotel® IntelliGate® 150/300 as of I7.9
Configuration 139
syd-0210/1.7 – I7.9 – 12.2009
Tab. 71 Authorizations for carrying out AIMS functions
5. 3. 1. 4 Interface access
The following interfaces can be enabled or disabled:
• OIP
Allows the OIP server to access the PBX. This authorization is not intended for in-
dividual persons.
• Office 45
Allows unlimited access to the configuration data via Office 45 (System Assist-
ant).
• FTP
Allows access to the FTP server of the PBX. Needs to be enabled for software up-
load.
• Monitor
Allows monitors to access the PBX for fault diagnosis.
• First party CTI
Allows first-party applications to communicate with the PBX via the IP network
by means of the CTI interface. This authorization is not intended for individual
persons.
• Third-party CTI
Allows third-party applications to communicate with the PBX via the IP network
by means of the CTI interface. This authorization is not intended for individual
persons.
Features Installer System Manager Attendant
• Upload (PC -> PBX) ✓ ––
• Download (PPX -> PC) ✓✓✓
• Backup (PC -> Disk) ✓✓✓
• Restore (Disk -> PC) ✓ ––
•Data export ✓✓✓
• Data import ✓ ––
• Transfer AIN configuration ✓ ––
• Set sales channel ✓ ––
• PBX first start ✓ ––
•PBX restart ✓ ––
• Status change remote maintenance – – ✓
• Software upload ✓ ––