Ascotel® IntelliGate® 150/300 as of I7.9
Operation and Maintenance 197
syd-0210/1.7 – I7.9 – 12.2009
sage is sent to the signal destinations immediately; while the event type "No Re-
sponse from Network", no event message needs to be sent to the signal destina-
tions.
6. 6. 1. 3 Signal destinations
4 signal destinations can be configured in the Fault & Maintenance Manager. Any
one of the four event tables can be assigned to each signal destination.
When the PBX is first started, one event table with its own number is assigned to
each signal destination.
Signal destinations include:
• System terminals with alphanumeric display)
• External signal destination (signal destination PC (SEM) via ISDN or LAN / WAN
to T interface)
• Local signal destination (e.g. PC (SEM) / printer, PC (SEM) on S interface /
Ethernet interface)
• Event log (event protocols in the Fault & Maintenance Manager)
There are several possibilities for connecting the signal destinations with a PBX:
To Next Page
Loading...
