Aastra Ascotel IntelliGate 150 - Working Offline (AIMS Database)

Ascotel® IntelliGate® 150/300 as of I7.9
148 Configuration
syd-0210/1.7 – I7.9 – 12.2009
5. 5. 1 Working offline (AIMS database)
With the AIMS database you can only work in offline mode. The following functions
are available:
Open
All the data from the selected PBX is loaded from the AIMS database into the PC’s
main memory and made available for processing. When you modify the parame-
ters in an AIMS Manager, a check mark is placed alongside the corresponding loca-
tion on the menu tree.
Note:
The changes and the check marks are retained even if a Manager is closed
without saving.
Close
The AIMS database is closed. If data was modified, the system will ask whether you
want to save the changes in the AIMS database.
Save
After editing, the modified data is written from the PC's main memory into the
AIMS database and the check marks on the modified parameters are deleted. Sav-
ing always stores the data from all the AIMS Managers.
Backup
The "Backup" function on the AIMS Shell stores the PBX data from the AIMS data-
base to a backup file specified by the user. If the current PBX data is to be saved, it
must first be loaded into the PBX database using "Download".
Tip:
Make two backup diskettes of the PBX data: Keep one with the system
and give the other to the Installer.
Restore
The Restore function loads the PBX data from a backup file into the AIMS database.
The data can then be transferred to the PBX using the Upload function.