Aastra Ascotel IntelliGate 150 - Event Types

Ascotel® IntelliGate® 150/300 as of I7.9
192 Operation and Maintenance
syd-0210/1.7 – I7.9 – 12.2009
6. 6. 1. 1 Event types
Tab. 96 Event types, in alphabetical order
Event/ error message Trigger condition Details
ACD server out of service ACD server defined as destination but not
responding.
Date, time
ATAS: connection established ATAS: connection (re) established Date, time
ATAS: Connection lost ATAS: connection lost Cause (0: Logoff, 1: missing
cycle signal), date, time
Card out of service A card previously in operation has stopped
functioning.
Number of the expansion slot,
date, time
CL Printer Jam • No response from system printer for past 4
minutes
• Printer out of paper or switched off
V.24 interface, interfaces/card
number, port number, date,
time
CTI first party Connection
lost
The ATPC3 first-party link was interrupted
because the cycle signal is missing.
User number, date, time
CTI first party Connection re-
established
The ATPC3 first-party link was (re)established User number, date, time
CTI third party: Connection
lost
The ATPC3 third-party link was interrupted Cause (0: Logoff, 1: missing
cycle signal), date, time
CTI third party: Connection
re-established
The ATPC3 third-party link was (re)established Date, time
ESME unobtainable The LAN connection between the SMSC and
the ESME is interrupted
Date, time
External signal destination
missing
External signal destination not automatically
reachable
0: Busy / 1: Not available / 2:
Barred / 3: Undefined, date,
time
External SMS gateway unob-
tainable
External SMS gateway unobtainable by net-
work provider or incorrectly configured
Date, time
Fan stopped The fan is jammed or defective or the connec-
tion is no longer making contact.
Date, time
ICC overflow Individual cumulative counter or cost centre
counter overflow
User number, cost centre,
exchange line, room number,
date, time
Inactive radio unit port Radio unit not responding Card number, port number,
date, time
Insufficient bandwidth An user in an AIN is trying to set up a connec-
tion and the bandwidth currently available
with the WAN link is insufficient.
Link ID, WAN link name, availa-
ble bandwidth in Kbit/s, date,
clock
Internal signal destination
missing
Local output blocked or not available 0: Busy / 1: Not available / 2:
Barred / 3: Undefined, date,
time
IP terminal: Connection lost An IP system terminal is no longer connected
to the PBX
User number, terminal ID, date,
time