Ascotel® IntelliGate® 150/300 as of I7.9
Expansion Stages and System Limits 57
syd-0210/1.7 – I7.9 – 12.2009
If an overload occurs, reduce the required supply power (e.g. by powering DECT ra-
dio units or system terminals locally).
3. 5. 5. 2 Limits per terminal interface
The power supply-related limit per terminal interface depends on the following
variables:
• Terminals used
• Bus configuration
• Line length and conductor cross-section
For information on the calculations refer to "Terminal interfaces", page 99.
To Next Page
Loading...
