Aastra Ascotel IntelliGate 150 - Page 56

Ascotel® IntelliGate® 150/300 as of I7.9
56 Expansion Stages and System Limits
syd-0210/1.7 – I7.9 – 12.2009
Tab. 19 Average power requirements of terminals
Overload shutdown
If the rated power is exceeded the power supply is disconnected. It is restored after
approx. 20 s.
1)
terminals
1)
Assumptions:
Traffic volume with system terminals: Call Connection 38%, Ringing 2%
Radio unit SB-4/SB-4+: Active call connection on 2 channels
Radio unit SB-8: Active call connection on 4 channels
Background lighting Aastra 5380: 30% illuminated
LEDs on terminals and expansion keypads: 20% illuminated
Connection Output P [mW]
Office 10 AD2 interface 340
Office 25 AD2 interface 380
Office 35 AD2 interface 280
2)
2)
he value applies to hardware version 2. The value for hardware version 1 is 60 mW lower.
Office 45/45pro AD2 interface 660
2)
Office 45pro with power supply unit AD2 interface < 10
Expansion keypad (EKP) Office 35, Office 45 80
Alpha keyboard (AKB) Office 35, Office 45 20
Aastra 5360 AD2 interface 280
Aastra 5370 AD2 interface 680
Aastra 5380 AD2 interface 820
Aastra 5370, Aastra 5380 with power supply
unit
AD2 interface 0
Aastra M530 expansion keypad Aastra 5370 110
Aastra M530 expansion keypad Aastra 5380 120
Aastra M535 expansion keypad Aastra 5370, Aastra 5380 0
3)
3)
An Aastra M535 always requires a power supply unit
Pocket Adapter AD2 interface 390
Radio unit without power supply unit SB-4/
SB-4+
AD2 interface 1400
Radio unit with power supply unitSB-4 AD2 interface 620
Radio unit without power supply unitSB-8 1 or 2 AD2 interfaces 1200
4)
4)
for each AD2 interface
Radio unit with power supply unit SB-4+/SB-
8
1 or 2 AD2 interfaces < 100
ISDN terminal S interface approx. 500
Analogue terminals a/b interface approx. 500