Aastra Ascotel IntelliGate 150 - Cabling Interfaces; Port Addressing

Ascotel® IntelliGate® 150/300 as of I7.9
Installation 87
syd-0210/1.7 – I7.9 – 12.2009
4. 7 Cabling interfaces
All the interfaces are routed to the front panel and are therefore accessible without
opening the system.
Fig. 34 Interfaces on the front panel with port designation
4. 7. 1 Port addressing
A port address is always of the type x.y. x is the number of the card slot, and y, the
port number.
The slot numbering begins with 0 (= mainboard) and ends with 2 (for A150) or 4
(for A300).
With S interface and AD2 interface addresses, the terminal selection digit (TSD) is
displayed in AIMS in addition to the slot and port numbers.
Tab. 24 Examples of interface addressing
Slot Port address
Mainboard; AD2 interface x.5 0.5
Interface card on slot IC1; interface x.3 1.3
Terminal with TSD 2 on interface card in IC3; interface x.4 3.4-2
LINK /
LAN
AD2
0.7
AD2
0.5
a/b
0.3
1.1 1.3 2.1 2.3 3.1 3.3 4.1 4.3
1.2 1.4 2.2 2.4 3.2 3.4 4.2 4.4
0.80.60.4
SYS F4 F3 F2 F1 F0 LAN AUX PWR
PWR AUDIO CTRL
AD2a/bLAN AD2