Ascotel® IntelliGate® 150/300 as of I7.9
Configuration 153
syd-0210/1.7 – I7.9 – 12.2009
See also:
The procedural steps for configuring an individual system, a private net-
work (PISN) or an Ascotel® IntelliGate® Net (AIN) are described in detail in
AIMS help.
5. 6. 3 Configuration with AIMS (online)
If a PBX that has already been configured is present, the configuration can be di-
rectly loaded and edited with AIMS.
If the PBX to be configured is in the first-start state, the first-start parameters are
loaded.
See also:
– The procedural steps for setting up and establishing a connection are
described in detail in AIMS help.
– Part of the configuration settings is also accessible via the System
Assistant function on Office 45. A separate set of User’s Guide is availa-
ble for this.
5. 6. 4 Activating the licences
The licence information is stored on the EIM card (Equipment Identification Mod-
ule) located on the mainboard.
The licence information includes:
• The EID (Equipment Identification) serial number of the EIM card
• The sales channel identification CID (Channel Identification)
• Licence code LIC
• System type
Each basic system is supplied with a licence certificate containing the above infor-
mation (without licence code). Please keep the certificate in a safe place.
Tab. 77 Example of licence information
Licensing
Equipment Identification (EID): 81154445474349760E5844D276000035A317
Channel Identification (CID): 0
Licence code (LIC): 0408040158F396792739
System type: A300
To Next Page
Loading...
