Ascotel® IntelliGate® 150/300 as of I7.9
46 Expansion Stages and System Limits
syd-0210/1.7 – I7.9 – 12.2009
LAN IP terminals Aastra 2380ip,
Aastra 5360ip,
Aastra 5370ip,
Aastra 5380ip,
Office 1600IP,
SIP terminals
12
1)
50 60 100
IP Operator Consoles Office 1560IP,
Aastra 5380ip
48 8 16
Aastra SIP terminals Aastra 6730i,
Aastra 6731i,
Aastra 6751i,
Aastra 6753i,
Aastra 6755i,
Aastra 6757i
Aastra 6739i
10 50 60 100
- Virtual and GSM termi-
nals
20 100 100 100
S Terminals on S interfaces (total) 10 50 60 100 8
4)
Terminals as per
ETSI standard
• ISDN terminals
• ISDN PC cards
• ISDN LAN routers
• ISDN Terminal Adapt-
ers
10 50 60 100
a/b Terminals on a/b inter-
faces (total)
10 18 18+18 100 1
Analogue, nationally
approved terminals
• Pulse dialling (PUL)
• Frequency dialling
(DTMF)
• Group 3 fax machines
5)
• Answering machines
• Modems
10 18 18+18 100 1
1)
Of which at least 2 are IP system terminals
2)
With DECT on only one system
3)
Operation on 2 AD2 interfaces in each case
4)
Maximum of 2 simultaneous call connections.
5)
Transmission with the T.38 protocol is recommended for Fax over IP. The corresponding DSP resources need
to be allocated.
Inter-
face
Terminal type
System Termi-
nals
per
A150
per
A300
isyLink
A300 +
A300
per AIN
with A300
as Master
per
inter-
face
To Next Page
Loading...
