Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
SIP PHONEs 480i, 9112i and 9133i 05/2008 Page 8-1
8 SIP PHONES 480i, 9112i AND 9133i
SIP phones 480i, 9112i and 9133i are used for telephone calls on an IP network, using the SIP
signalling protocol. They are managed from PBX release 4.2.
Release 1.4.1 of the firmware for AASTRA SIP phones 480i, 9112i and 9133i is compatible with
NeXspan R4.2 solution:
• NeXspan XC, XS, XL, XD G.2E ed D and later (official release)
• NeXspan Call Server G.2J and later (official release)
• NeXspan 500 G.2E ed F and later (official release)
• NeXspan 50 G.2E ed F and later (official release)
Caution : The compatibility of AASTRA SIP phones with other PBX platforms cannot be
guaranteed by AASTRA MATRA and must be checked by our partners. The target PBX
platform must be compatible with RFC 3261 for the SIP protocol.
8.1 SIP phone 480i
Figure 8.1 SIP phone 480i
8.1.1 Description of SIP phone 480i
A detailed description of the phone is given in the user guide (see Section 1.6.1)
8.1.2 SIP phone 480i sales code
The sales code for SIP phone 480i with mains unit is A170001311055.
To Next Page
Loading...
