Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
Aastra Phone 312 05/2008 Page 10-27
10.7 Configuring the SIP server
You can save on the handset the accounts required for at most five different SIP servers. This
data is saved as accounts on a list from which you can select a server. The system administrator
determines the accounts for the SIP server.
If a network connection is set up, a few seconds after you have exited the menu, the access name
and user ID (= call number) must be displayed on the screen. If this is not the case, see System >
Accounts > Info (refer to User Manual, p. 59).
You cannot call Info if no access has been configured and no access has been received by DHCP.
Press .
Select , then confirm by pressing .
Select , then confirm by pressing .
Select , then confirm by pressing .
or
Press , select , then confirm by pressing .
Enter the administrator’s secret code (by default 22222).
The empty input mask is displayed for accounts with an SIP server.
To Next Page
Loading...
