Aastra M720 - Managing the Terminals; From V11.3 and before R1.3

Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
General information 05/2008 Page 2-5
2.10 Managing the terminals
2.10.1 From V11.3 and before R1.3
2.10.1.1 Operation on F0/F1/F2
Management of the sets in the M7xx range in the PBX is via the MMC in menu 5-4-3 "Digital set
management".
The following screen is displayed:
This menu is used to add new names to the list, to change the names of the terminals or to delete
them. Each set model is designated by a name which is shown when the extension characteristics
are displayed.
• MODEL No.: enter the model number on 3 digits (if the number has already been defined, the
associated name will be displayed automatically). Refer to the table below for M7xx range set
correspondence.
•
49 M730
50 M720
51 M740
52 M760
53 M760+M700
54 M760+M700+ M700
55 M760 + Z cartridge
56 M760+M700+Z cartridge
57 M760+M700+M700+Z cartridge
58 M780
59 M780 + M700
60 M780 + M700+M700
61 M780+M700+M700+M700
62 M780 + Z cartridge
63 M780+M700+Z cartridge
64 M780+M700+M700+Z cartridge
65 M780+M700+M700+Z cartridge
67 M725
MODIFICATION OF DIGITAL SET NAMES
MODEL No. ...
NAME TO BE ASSIGNED ............
ACTION ......