AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 5-14 05/2008 To install sets and cartridges in the i7XX range
5.3.1 Main features
• screen with 1 line x 16 characters,
• 10 programmable keys with LCD icons,
• "Hands free" function, full duplex with LED indicator,
• mute function with LED indicator,
• message/call indicator lamp,
• direct voice mail recall by R key (in standby),
• call logs (10 outgoing calls, 50 incoming calls),
• internal directory for 20 numbers,
• user-friendly navigator,
• specific headset connector (remove cap),
• handset earpiece capsule for the hard of hearing.
5.3.2 Marketing codes
Set no longer included in the catalogue.
5.3.3 Options
N/A.
5.3.4 Installation
5.3.4.1 Connections
Refer to the network connection diagram in section 12.1.2.
If required, refer to the mains connection diagram, section 12.2.4.3.
5.3.4.2 Connection
To the LAN: using an Ethernet cable (remote supply possible via the LAN).
Nota : If the cord is sleeved, a DH520A adapter must be used.
To the telephone handset: by a coiled cable with an RJ9 type male connector at each end.
To the headset: see Section 12.3.1.
To the mains: by power supply unit (Ref. : PN1121D) if power is not remotely supplied to the set
via the LAN.
To Next Page
Loading...
