Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
SIP PHONES 51i, 53i, 55i AND 57i 05/2008 Page 9-33
9.12.3.2 Configuring the TFTP server provided with the NCS software
The TFTP server PumpKIN (freeware) is delivered with the NCS software since version G2J.
The TFTP server PumpKIN is installed as a service (TFTP-PumpKIN).
In the Services window, select the TFTP-PumpKIN application.
Right-click on the line TFTP-PumpKIN and select Properties. The TFTP-PumpKIN Service
Properties window appears
Set TFTP-PumpKIN service start to automatic. It is obligatory to start the TFTP-PumpKIN server in
service mode because the TFTP-PumpKIN service then starts the TFTP-PumpKIN server with low
priority.
To Next Page
Loading...
