27
Alter Sec. Code
00000
SET UP RETRANS
–––––
–––––
Alter Cal. Code
00000
Return to
top of page
Duration Mins
10
Frequency Hrs
8
A2 Action High
Low
A2 Setpoint
A2 Type Fail
–––––
Temp
pH
Off
Water Wash
A2 Type Redox
Off
Water Wash
Water Wash
Fail
or
Off
Redox
OR
Redox
Redox
pH
Temp or pH
800
.
Continued from previous page
7 PROGRAMMING…
…7.4 Set Up Alarms Page
Water Wash (4631/4636 only) /Alarm 2 Action
To select the Water Wash cycle press the key until Water Wash is displayed.
To select Alarm 2 Type, press the
key until A2 Type is displayed, then repeat as
for Alarm 1 Type, previous page.
Wash Frequency
Water wash frequency can be set in 15 minute increments to between 15 and 60
minutes, then in 1 hour increments to between 1 and 24 hours.
Wash Duration
Water wash duration can be set in 15 second increments to between 15 and 60 seconds,
then in 1 minute increments to between 1 and 10 minutes.
Alarm 2 Action
Repeat as for Alarm 1 Action.
Alarm 2 Set Point
Repeat as for Alarm 1 Set Point.
Alter Secure Parameters Security Code
Set the secure parameters security code to a value between 00000 and 19999.
Alter pH Calibration Security Code
Set the pH calibration security code to a value between 00000 and 19999.
Advance to Set Up Retransmission Page.
To Next Page
Loading...
