ABB A140-H55 - Removing the Nozzle Ring

Operation Manual / 4 Product description / A130-H.. - A140-H..
8
Dismantling and fitting
Page 85 /
115
© Copyright 2015 ABB. All rights reserved.
HZTL4030_EN
Revision C
September 2015
8.9 Removing the nozzle ring
Figure 38: Removing the nozzle ring
1. Place the fastening strips (51002) under the nozzle ring.
2. Pull out the nozzle ring (56001) with the two extraction devices (90070) and the service
support base (90012).
3. Remove the lamellar sealing ring (56005).
4. Remove the burst ring (57210).