EasyManua.ls Logo

ABB A170-M Series - Malfunctions When Stopping; Table 30: Malfunctions When Stopping - Runout Noises; Table 31: Malfunctions When Stopping - Shortened Runout Time

ABB A170-M Series
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation Manual / A170-M.. - A175-M..
8 Troubleshooting / 8.4 Malfunctions when stopping
© Copyright 2022 ABB. All rights reserved. HZTL4033_EN Rev.K January 2022
Sporadic surge blows
Surging of the turbocharger can occur during certain operating states, such as when redu-
cing the engine load quickly when manoeuvring. When this happens, the flow direction in the
compressor is momentarily reversed. Such sporadic surge blows do not impair the safe op-
eration of the turbocharger.
¡ A surge blow is accompanied by a loud bang and escape of hot air from the filter silencer.
8.4 Malfunctions when stopping
Runout noises
Possible causes Remedy
Turbochar-
ger
Turbocharger contaminated Clean
Bearing damaged Contact an ABB Turbocharging
Service Station
Rotor rubbing
Foreign object in the turbocharger
Table30: Malfunctions when stopping – Runout noises
Shortened runout time
Possible causes Remedy
Turbochar-
ger
Turbocharger contaminated Clean
Bearing damaged Contact an ABB Turbocharging
Service Station
Rotor rubbing
Foreign object in the turbocharger
Table31: Malfunctions when stopping – Shortened runout time
Page 74 / 146

Table of Contents

Other manuals for ABB A170-M Series

Related product manuals