EasyManua.ls Logo

ABB A170-M Series - Removing the Air Inlets; Fig. 34: Removing the Filter Silencer

ABB A170-M Series
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation Manual / A170-M.. - A175-M..
9 Disassembly and assembly / 9.3 Removing the air inlets
© Copyright 2022 ABB. All rights reserved. HZTL4033_EN Rev.K January 2022
9.3 Removing the air inlets
9.3.1 Removing the filter silencer
u Dismantle insulation as far as necessary.
Fig.34: Removing the filter silencer
1. Loop lifting gear through the fin on the filter silencer and secure to the eyelets at the rear
with shackles (90195).
2. Loosen nuts (72027) and remove with washers (72028).
u Remove and put down filter silencer.
Page 79 / 146

Table of Contents

Other manuals for ABB A170-M Series

Related product manuals