ABB AC500-eCo V3 - Page 78

Parameter Value
PM5012-T-ETH PM5012-R-ETH PM5032-T-ETH
PM5052-T-ETH
PM5072-
T-2ETH(W)
PM5032-R-ETH
PM5052-R-ETH
Digital inputs/
outputs,
configurable
- - 2 2
Functionality of
digital inputs/
outputs,
configurable
- - 2 DC 24 V DC
● 2 standard
I/Os
configurable
2 DC 24 V DC
usable as
● 2 DC
standard (DI
24 V DC or
DO-T) or
● 2 PWM (30
kHz) or
● 1 PTO (200
kHz) as
Pulse/Direc-
tion or
CW/CCW
LED displays For signal states
Internal power
supply
Via processor module
External power
supply
Via UP and ZP terminal
6.1.1.7.3 Electrical connection
WARNING!
Risk of death by electric shock!
Hazardous voltages can be present at the terminals of the module.
Make sure that all voltage sources (supply voltage and process supply voltage)
are switched off before you begin with operations at the system.
NOTICE!
Risk of damaging the PLC modules!
The PLC modules must not be removed while the plant is connected to a power
supply.
Make sure that all voltage sources (supply and process voltage) are switched
off before you
– connect or disconnect any signal or terminal block
– remove or replace a module.
Device specifications
Processor modules > PM50xx
2021/06/293ADR010635, 2, en_US78