1. Right-click the station object “PLC_AC500_V3” in the device tree.
2. Select “Reset origin device [station name]”.
ð
The application is completely erased from the CPU (complete project from all memory
areas).
5.5 Further information on our AC500 portfolio
● PLC homepage: abb.com/plc
● PLC catalog as PDF: to.abb/SZTxDTqG, and also as flipbook
● The manual for Automation Builder and all AC500 products is available via Automation
Builder. Go to menu “Help è Contents”, the manual will open.
Further information on our AC500 portfolio > Reset the CPU
2021/06/293ADR010635, 2, en_US64