5.4.4.3.3 Compile the project
Before logging-in to the CPU, you need to compile the complete code without any errors.
Select menu “Build è Generate code”.
ð
The result of the compiling is shown in the “Messages” field at the bottom of the
screen.
If you skip the compiling and select “Login”, the Automation Builder will automatically trigger
compiling in advance to logging-in.
5.4.4.3.4 Save the project
Select menu “File è Save Project”.
Alternatively, select the save icon
in the tool bar.
Alternatively, press [Ctrl] + [S].
5.4.5 Set-up the communication gateway
IP is configured properly
Ä
Chapter 5.2.3 “Set-up communication parameters in windows”
on page 18.
Example project > Set-up the communication gateway
2021/06/29 3ADR010635, 2, en_US 39