ABB AC500 - Minimum Spacing

____________________________________________________________________________________________________________
G1 Introduction to AC500 1-38 AC500 / Issued: 07.2006
Minimum spacing
DC532DC532DC505
DC532DC532PM581CM577CM572
DIN rail,
earthed
Mounting
plate,
earthed
DIN rail,
earted
Mounting
plate,
earthed
Cable duct
20 mm minimum distance between
the modules and the cable duct
Figure: AC500/S500 module mounting into cabinets
Maintain spacing from enclosure walls, wireways, adjacent equipment, etc. Allow minimum 20 mm (1 in.)
of space on all sides, as shown. This provides ventilation and electrical isolation.