ABB AC500 - Examples; Examples for Introduction; Getting Started

____________________________________________________________________________________________________________
G1 Introduction to AC500 1-76 AC500 / Issued: 07.2006
Examples
Examples for introduction
Getting started
We will introduce you to the system using a simple example.
DC532PM581
3
M
FE
1
2
4
5
6
7
8
9
0V
Functional Earth
ZP
M0V ZP
L+ +24 V DC UP
L+ +24 V DC UP
FE
24 V DC TK501
24 V DC
+
–
The following components are required for this example:
• One basic unit (e.g. PM581) and one terminal base (e.g. TB511-ETH).
• One digital I/O module DC532 (DX522 or DX531 as an alternative) and one I/O terminal unit (e.g.
TU516).
• One 24 VDC power supply.
• A PC with the programming software PS501 installed.
• One cable (TK501) to connect the PC to the basic unit.