Drive module of frame size R7 with bottom exit
17
13 Fasten the air baffle to the fastening points of the drive module and to the support rail with screws.
14 Fasten the back panel of the enclosure.
15 Fasten the side panels of the enclosure.
Step Instruction Photo
Cutting
for door
wires and
top front
bar
Cutting for
laminated
copper
bars
The air baffle is needed for preventing
hot air from entering the cool area of the
cabinet.
Cooling air flow into
the drive module
Cooling air flow
(side view)
Air baffle
68484871 A
To Next Page
Loading...
