Drive module of frame size R8
36
12 Step drill lead-throughs in the top cover of the top entry clear plastic busbar shroud. Pass the laminated copper bars
through the lead-throughs and the lower part of the shroud.
13 Connect the laminated copper bars to the input terminals of the drive module.
14 Fasten the top entry clear plastic busbar shroud to the drive module.
Step Instruction Photo
Step drill lead-throughs
for the busbars.
Top entry busbar shroud fastened
Remove the protective
film.
14
14
14
14
13
13
13
14
12
To Next Page
Loading...
