Drive module of frame size R8
37
15 Fasten the air baffle to the fastening points of the drive module and to the support rail with screws.
Step Instruction Photo
The air baffle is needed
for preventing hot air from
entering the cool area of
the cabinet.
Cooling air flow
into the drive
module and
cabinet
Cooling air flow (side view)
Air baffle
Air baffle fastened
Fasten the baffle by
its top to the support
rail (PS 4944.000)
which is fastened to
the enclosure frame
top.
Fasten the baffle by
its bottom to the drive
module side top
fastening points.
Cutting for control wiring
Cutting for laminated copper bars
Cooling air flow (front view)
To Next Page
Loading...
