ABB ACSM1 Series User Manual

75
5. In the Device view, select PLC_1 (PROFINET interface).
In the General tab, select Ethernet addresses and click Add new subnet to add the subnet and
then set IP Address in the IP protocol.
Figure 55 Assign IP

ABB ACSM1 Series Specifications

General

Product Type	AC drive
Control Type	Scalar Control
Communication Interfaces	Modbus RTU
Protection Class	IP20
Mounting	Wall Mounting
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Storage Temperature	-40°C to +70°C
Input Voltage	380 V to 480 V AC
Operating Temperature	-10 to +40 °C (without derating)