3BSE 015 953R201 Rev B
3BSE001264/E
Template: 3BSE001286/E
Use of DANGER, WARNING, CAUTION, and NOTE
This publication includes, DANGER, WARNING, CAUTION, and NOTE information where appropriate to point out safety
related or other important information.
DANGER Hazards which could result in severe personal injury or death
WARNING Hazards which could result in personal injury
CAUTION Hazards which could result in equipment or property damage
NOTE Alerts user to pertinent facts and conditions.
Although DANGER and WAR NIN G hazards are related to personal injury, and CAUTION hazards are associated with
equipment or property damage, it should be understood that operation of damaged equipment could, under certain operational
conditions, result in degraded process performance leading to personal injury or death. Therefore, comply fully with all
DANGER, WARNING, and CAUTION notices.
TRADEMARKS
Master, MasterPiece, MasterView and MasterAid are registered trademarks of ABB Asea Brown Boveri Ltd. MasterNet,
MasterBus, and MasterBatch are trademarks of ABB Asea Brown Boveri Ltd. Advant, AdvaCommand, AdvaInform,
AdvaBuild, AdvaSoft and AdvaControl are reg. trademarks of ABB Process Automation Corp. HART is a trademark of HART
Communication Foundation. Echelon, LON, LonTalk, L
ONWORKS, LONMARK, and Neuron are registered trademarks of
Echelon Corporation. HP and all HP-products are registered trademarks of Hewlett-Packard Company. IBM and all IBM-
products are trademarks of International Business Machines Corporation. KERMIT is copyright 1985, Trustees of Colombia
University. Lotus 1-2-3 is a trademark of Lotus Development Corporation. MATLAB is a registered trademark of The
MathWorks Inc, USA. MODBUS is a registered trademark of GOULD Electronics. MOTIF and OSF are trademarks of Open
Software Foundation. MS-DOS, Microsoft, Microsoft Excel, and Word for Windows are registered trademarks of Microsoft
Corporation. Postscript is a registered trademark of Adobe Systems Inc.
PROFIBUS and PROFIBUS-DP are trademarks of
Profibus International (P.I.). Siemens and all Siemens-products mentioned in this publication are trademarks of Siemens AG.
UNIX is a registerd trademark of AT&T Corporation. VAX, VMS, Digital, DEC, VT100 - VT420 are trademarks of Digital
Eqipment Corporation. X-window Systems is a trademark of Massachusetts Institute of Technology. All rights to other
Trademarks reside with their respective owners.
NOTICE
The information in this document is subject to change without notice and should not be construed as a commitment by
ABB Automation Products AB. ABB Automation Products AB assumes no responsibility for any errors that may appear in
this document.
In no event shall ABB Automation Products AB be liable for direct, indirect, special, incidental or consequential damages of
any nature or kind arising from the use of this document, nor shall ABB Automation Products AB be liable for incidental or
consequential damages arising from use of any software or hardware described in this document.
This document and parts thereof must not be reproduced or copied without ABB Automation Products AB’s written permission,
and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.
The software described in this document is furnished under a license and may be used, copied, or disclosed only in accordance
with the terms of such license.
CE MARKING
This product meets the requirements specified in EMC Directive 89/336/EEC and in Low Voltage Directive 72/23/EEC.
Copyright © ABB Automation Products AB 2001
To Next Page
Loading...
Need help?
General
