8
CONTROLMASTER CM10 | UNIVERSAL PROCESS CONTROLLER, DIN | CI/CM10-EN REV. C
2 Specification
Mechanical data
Protection
• Front face IP66/ NEMA 4X
• Rear panel IP20
Dimensions
• Height – 97 mm (3.8 in)
• Width – 50 mm (2.0 in)
• Depth behind panel – 121 mm (4.8 in)
Materials of construction
Glass filled polycarbonate
Weight
0.38 kg (0.84 lb)
Electrical
Power supply ranges
• 100 to 240 V AC ±10 % (90 V min. to 264 V max.)
50/60 Hz
• 10 to 36 V DC (optional)
Power consumption
10 W max.
Inputs/Outputs
Analog inputs
• 1 universal
• 1 process
Analog outputs
• 1 standard
• 1 optional
• Galvanically isolated from the rest of the circuitry,
500V for up to 1 minute. Range programmable
@ 20 mA.
Relay outputs
• 1 standard
• 3 optional
• Fully programmable. Contacts rated at 5 A @ 240 V.
Standard relays are changeover. Optional relays are
selectable NO or NC by jumper.
To Next Page
