26 Installation Guide
Analog 4–20 mA inputs
WARNING
Shielded cable must be used for connecting to the 4–20 mA outputs.
—
Figure 8 Wiring of self-powered analog inputs
Figure 9 Wiring of two-wire, loop powered analog inputs
—
Figure 10 Wiring of three-wire, loop powered analog inputs
Terminal (J4, 5, 6) Description Shield
1 Analog 1 Terminal (J3) Description
2 Analog 2 1 Earth GND
3 Analog 3 2 Earth GND
Once all connections are made,re-install the enclosure cover and secure it with the 5 mm Allen key.
To Next Page
Loading...
