ABB DPA Upscale RI Series - Nameplate and Identification; Batteries and Storage

Section-1
04-3006_S1_OPM_ABB_DPA_UPSCALE_RI_10-80kW_EN_150316.doc Page 13/52 ABB
Modifications reserved
1.4.4 NAMEPLATE AND IDENTIFICATION
The technical specifications of the Equipment are provided on the nameplate, which is situated at the front of the
UPS. Check if it corresponds to the purchased material mentioned in the delivery note.
TYPE
PRODUCT DESCRIPTION
DIMENSIONS
R1Uxxx
UPScale RI 10
Subrack (448x310x565mm)
R1Uxxx
UPScale RI 11
Subrack (448x487x735mm)
R1Uxxx
UPScale RI 12
Subrack (448x665x735mm)
R2Uxxx
UPScale RI 20
Subrack (448x440x565mm)
R2Uxxx
UPScale RI 22
Subrack (448x798x735mm)
R2Uxxx
UPScale RI 24
Subrack (448x1153x735mm)
R4Uxxx
UPScale RI 40
Subrack (448x798x735mm)
1.4.5 BATTERIES AND STORAGE
The standard batteries of the UPS are sealed, maintenance-free batteries, sometimes mounted in an external
battery cabinet and will typically be connected when the UPS is commissioned.
The battery life depends very much on the ambient temperature. A temperature range between +20° and +25°C will
achieve the optimum battery life.
If the UPS is delivered without batteries, the manufacturer is not responsible for any damage or malfunctioning
caused to the UPS by incorrect wiring.
!
KG
HEAVY !