ABB DPA Upscale RI Series - Input Characteristics; Battery Characteristics

Section-10
04-3006_S10_TDS_ABB_DPA_UPSCALE_RI_10-80kW_EN_150316.doc Page 6/16 ABB
Modifications reserved
10.3 INPUT CHARACTERISTICS
Module type
unit
UPScale M 10
UPScale M 20
Module rated power
kW
10
20
Nominal Input Voltage
V
3x380/220V+N, 3x400V/230V+N, 3x415/240V+N
Input Voltage Tolerance
(ref to 3x400/230V) for Loads in %:
V
(-20%/+15%) 3x308/184 V to 3x460/264 V for <100 % load
(-26%/+15%) 3x280/170 V to 3x460/264 V for < 80 % load
(-35%/+15%) 3x240/150 V to 3x460/264 V for < 60 % load
Input Frequency
Hz
35 – 70
Input Power Factor
-
0.99 @ 100 % load
Inrush Current
A
max. In
Total harmonic distortion (THDi)
%
< 4.5
< 3.0
Max. input power with rated output power
(cosphi = 1.0), rated input voltage and
charged battery per Module
kW
10.5
21
Max. Input Current with rated output
power (cosphi = 1.0), rated input voltage
and charged battery per Module
A
15.2
30.4
Max. Input Power with rated output power
(cosphi = 1.0), rated input voltage and
discharged battery per Module
kW
11.5
23
Max. Input Current with rated output power
(cosphi = 1.0), rated input voltage and
discharged battery per Module
A
16.6
33.3
10.4 BATTERY CHARACTERISTICS
Module type
unit
UPScale M 10
UPScale M 20
Battery Type
-
Maintenance free VRLA or NiCd
Allowed nr. VRLA 12V battery blocks
-
30
2)
- 50
40
2)
- 50
Allowed nr. of 1.2V NiCd cells
-
300
2)
- 500
400
2)
- 500
Maximum charging current per module
A
4 (6 on request)
Battery Charging Curve
-
Ripple free ; IU (DIN 41773)
Temperature compensation
-
Standard (temp. sensor optional)
Battery Test
-
Automatic and periodically (adjustable)
2)
Depending of the effective autonomy (see table here below)
Module type
M10
M20
5 min autonomy: min. number of 12V batt. blocks
30
40
any autonomy: min. number of 12V batt. blocks
34
48