ABB DPA Upscale RI Series - FRONT VIEW of DPA Upscale RI 20 and CONNECTION TERMINALS

Section-2
04-3006_S2_OPM_ABB_DPA_UPSCALE_RI_10-80kW_EN_150316.doc Page 8/14 ABB
Modifications reserved
2.2.4 FRONT VIEW OF DPA UPScale RI 20 AND CONNECTION TERMINALS
Front side
Rear Side Terminal blocks
Terminal covers and indications
1 Not used JR2 forseen for RJ45 Plug
2 X2 Customer interface on Phoenix Terminals = Potential free contacts
X1 Customer Inputs (detail see Section 3 / 3.1.2 )
3 LED red /green
4 JD1 RS232 / Sub D9/ female, PC interface
5 USB PC Interface
6 SNMP Slot for optional SNMP card ONLY
7 Modem Slot for optional Modem/Ethernet card ONLY
8 Battery terminal + / N / - for Single battery 10/16 mm2
8* Battery terminal + / N / - for Common battery M5
9 Input Bypass terminal for Dual Input feed 16/25 mm2
10 Input Rectifier terminal for Single feed 16/25 mm2
11 Output Load terminal 16/25 mm2
12 F4-1 Battery Circuit Breaker 2x63 A / 800 VDC
13 F4-2 Battery Circuit Breaker 2x63 A / 800 VDC
14 IA1 Maintenance Bypass
Wiring see page 2 section 2.1
6 7 14 12 13
8 /8* 9+10 11
4
5
1
2
3