Section-3
04-3006_S3_OPM_ABB_DPA_UPSCALE_RI_10-80kW_EN_150316.doc Page 2/4 ABB
Modifications reserved
3.1 INTERFACING
The UPS cabinet is provided with communication card which provides the system information
Communication card (next to the distribution) :
Input Interfaces X1 (Phoenix terminals)
Output Interfaces : X2 DRY PORTs ,volt-free contacts (Phoenix terminals)
Smart Port JD1 / RS232 Sub D9 / female : Interface (UPS system to computer)
USB Interface (UPS system to computer)
On the Interface board are located two LED’s (3) :
Green LED showing the status of the Interface:
- Fast Blinking: 2 times/sec = Interface is OK
Red LED Board Alarm (indicates a possible replacement of the board)
To Next Page
Loading...
