EL3000 CONTINUOUS GAS ANALYZERS | CI/EL3000-EN REV. C 113
Menu Overview
This menu depends on the configuration of the gas analyzer
Figure 55: Menu overview
Notes on the operating concept
The operating concept of the gas analyzer requires that the functions needed in normal operating mode are operated and configured
directly on the device.
On the other hand, those functions that are seldom needed, for example when commissioning the device, are named, configured and
then loaded into the gas analyzer offline using the ECT ‘EasyLine Configuration Tool’ software tool, also referred to as the
‘Configurator’ in this instruction.
To Next Page
Loading...
