8 EL3000 CONTINUOUS GAS ANALYZERS | CI/EL3000-EN REV. C
… 1 Safety
… Notes on data safety
Access authorizations
Access to both the calibration functions and those functions
used to change the instrument configuration can be restricted
by means of password protection.
The password protection is not activated at the factory (except
in the case of gas analyzers used for emission monitoring).
It is recommended that the factory-set passwords be changed
by the operator, by means of the ECT software tool (“EasyLine
Configuration Tool”) (Password protection on page 111). This
limits access to both the ECT software tool itself and to the
calibration and configuration functions of the device.
Manufacturer’s address
ABB Automation GmbH
Measurement & Analytics
Stierstädter Str. 5
60488 Frankfurt am Main
Germany
Tel: +49 69 7930-4666
Email: cga@de.abb.com
Service address
If the information in this Commissioning Instruction does not
cover a particular situation, ABB Service will be pleased to supply
additional information as required.
Please contact your local service representative.
For emergencies, please contact:
Customer service center
Tel: +49 180 5 222 580
Email: automation.service@de.abb.com
To Next Page
Loading...
