Shutting Down and Packing the Gas Analyzer 63
Shutting Down and Packing the Gas Analyzer
Shutting Down the Gas Analyzer
Shutting Down the Gas Analyzer
In the case of a temporary shutdown:
1 Shut off the sample gas.
2 Purge the gas lines and gas feed paths in the analyzer module with
dry fresh air or nitrogen for at least 5 minutes.
3 Switch off the power supply to the gas analyzer.
In the case of a long-term shutdown, carry out the following in
addition:
1 Remove the gas lines from the gas analyzer ports. Tightly seal the
gas ports.
2 Disconnect the electrical leads from the gas analyzer.
Ambient Temperature
Ambient temperature during storage and transport: –25 to +65 °C
To Next Page
Loading...
