ABB FBVi-2U4-4T - Page 39

FBVi-2U4-4T | Installation
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
39
MAN0148 rev 5
Accessing the FBVi’s Web UI
Point a web browser at the FBVi device’s IP address, and log in to the Web UI.
Note: By default, all FBVi devices leaving the factory are configured with the following login:
username: admin
password: cylonctl
It is recommended that you change these credentials by clicking on the User icon in the top-right of the Web UI page
and selecting Change Password .