EtherNet/IP – Diagnostics 243
MODULE
Off There is no power applied to the device.
Green Device is operating in a normal condition.
Flashing green Device needs commissioning due to
configuration missing, incomplete or
incorrect. The device may be in the
Standby state. This may be caused by
the adapter waiting for a response from a
DHCP server or Duplicate Address
Detection to complete.
Flashing red Ethernet interface is disabled. Duplicate
Address Detection may have detected a
duplicate address. Check the IP
configuration and either initiate a
Fieldbus Adapter parameter refresh or
cycle power to the drive.
Flashing red-
green
Device is in Self Test.
Flashing orange,
alternating with
the HOST
Flashing orange
Internal file system error. The error may
be cleared by cycling drive power. If the
error persists, contact your local ABB
representative.
Name Color Function
To Next Page
Loading...
