ABB FENA-01 - Page 257

PROFINET IO – Start-up 257
3 = Conf.err Adapter configuration error: The major or
minor revision code of the common program
revision in the fieldbus adapter module is not
the revision required by the module or
mapping file upload has failed more than three
times.
4 = Off-line Adapter is off-line.
5 = On-line Adapter is on-line.
6 = Reset Adapter is performing a hardware reset.
32 FBA COMM SW
VER
Read-only. Displays the common program
revision of the adapter module in format axyz,
where:
a = major revision number
xy = minor revision numbers
z = correction number or letter.
N/A
ACS355:
FBA CPI FW REV
ACSM1:
FBA COMM SW
VER
ACS850/ACQ810:
FBA comm sw ver
ACS880/ACS580:
FBA A/B comm SW
ver
Common program version of the adapter
module
33 FBA APPL SW
VER
Read-only. Displays the application program
revision of the adapter module in format axyz,
where:
a = major revision number
xy = minor revision numbers
z = correction number or letter.
N/A
ACS355:
FBA APPL FW REV
ACSM1:
FBA APPL SW
VER
ACS850/ACQ810:
FBA appl sw ver
ACS880/ACS580:
FBA A/B appl SW
ver
Application program revision of the adapter
module
No. Name/Value Description Default