ABB HT596388 - Page 107

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
Tables
© Copyright 2017 ABB. All rights reserved. HZTL4037_EN Revision E July 2017
Tables
Table1: Related documents .......................................... 3
Table2: Weight of the turbocharger ........................... 7
Table3: Swivel lifting eye (S) to be used .................... 7
Table4: Requirements for threaded rods ................ 11
Table5: Tightening torque for turbocharger fixing
screws.............................................................................. 12
Table6: Lubricating oil pressure at oil inlet before
turbocharger .................................................................. 17
Table7: Lubricating oil temperature at the inlet .... 18
Table8: Lubricating oil temperature at the outlet. 18
Table9: Tightening torque(86505)........................... 22
Table10: Expected replacement intervals [h]......... 28
Table11: Maintenance table ....................................... 30
Table12: Dimensions of the cleaning container .... 36
Table13: Malfunctions when starting – Delayed
start-up .......................................................................... 39
Table14: Malfunctions when starting – Vibrations 39
Table15: Malfunctions when starting - Rotating
parts rubbing ................................................................ 39
Table16: Malfunctions during operation – Lubricat-
ing oil pressure too low............................................... 40
Table17: Malfunctions during operation – Speed re-
duces............................................................................... 40
Table18: Malfunctions during operation – Speed in-
creases ........................................................................... 40
Table19: Malfunctions during operation – Exhaust
gas temperature too high ........................................... 41
Table20: Malfunctions during operation – Charge
air pressure too low...................................................... 41
Table21: Malfunctions during operation – Charge air
pressure too high ......................................................... 42
Table22: Malfunctions during operation – Engine
performance losses ..................................................... 42
Table23: Malfunction – Turbocharger pumping.... 43
Table24: Malfunction – Sporadic surge blows....... 43
Table25: Malfunctions when stopping – Runout
noises.............................................................................. 44
Table26: Malfunctions when stopping – Runout
time too short............................................................... 44
Table27: Malfunction of the speed measurement
system – No signal or poor signal amplitude .......... 45
Table28: Malfunction of the speed measurement
system – Measured speed too high ........................... 45
Table29: Malfunction of the speed measurement
system – Measured speed too low............................. 45
Table30: Swivel lifting eye (S) to be used ................ 49
Table31: Ring nuts to be used .................................... 49
Table32: Weights of the assemblies [kg] ................. 50
Table33: Permissible clearances A and B ................. 59
Table34: Permitted nozzle ring compression PD ... 60
Table35: Tightening torque (72041).......................... 61
Table36: Tightening torque (72011) .......................... 63
Table37: Tightening torque (51007).......................... 65
Table38: Permissible clearances N and R................. 67
Table39: Tightening torque (51101) .......................... 68
Table40: Tightening torque (72020)......................... 69
Table41: Overview of tightening torques ................ 70
Page 77 / 77Page 77 / 77