ABB i-bus KNX Yucus YUB/U1.0.1 Series User Manual

KNX Technical Reference Manual
ABB i-Bus
®
KNX Yucus
101
Central Air Condition
VRV
Note: This parameter can only be used when the "VRV" page is activated in
"Page_combine". If VRV page title is "Deactivated", the VRV page will not display the
VRV page title, and it will display the default "Fan speed" and "operation state". If any of
the VRV page title is selected, It will display the VRV page title, "Fan speed" and
"operation state".
12.33.4 Page setting - Fresh Air Page Title
Options Deactivated
Fresh Air
Note: This parameter can only be used when the "Fresh Air" page is activated in
"Page_Combine". If Fresh air page title is "Deactivated", the Fresh air page will not display
the Fresh air page title and it will display the default "Fan speed" and "operation state". If
any of the Fresh air page title is selected, it will display the Fresh air page title, "Fan
speed" and "operation state".
12.33.5 Object no
Object name
Data type
Flags
PS: Page Switch 1 byte DPT 5.001 C, W, T, U
12.34 Application “RTC function”
12.34.1 General – Display language
Options English
Chinese
Russian
Configuration of display language on RTC LCD display screen.
12.34.2 General – Main Temperature display
Options Setpoint
Actual
If the actual temperature is to be shown on the display, the parameter must be set on
“Actual”. The control element will then primarily display the actual temperature. When
actuating the control element, the display changes to the setpoint adjustment. After non-
actuation of the control element, the current actual temperature again appears in the
display after the set waiting period.

ABB i-bus KNX Yucus YUB/U1.0.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX Yucus YUB/U1.0.1 Series
Category	Temperature Controller
Language	English