LST300 | COMPACT ULTRASONIC LEVEL TRANSMITTER | LST300–EN REV. E
21
The options available are
Level
,
Flow
and
Volume
.
5 Configure Empty Distance and press .
Note
Empty Distance is the distance from the face of the sensor to
the bottom of the tank. In Level mode, Empty Distance
indicates the distance from the sensor where the tank is empty.
6 Configure Span and press .
Note
Span is the distance from the bottom of the tank to the top of
the tank. In Level mode, Span indicates the tank full position.
7 Configure Blanking and press .
Note
Blanking is the area close to the transmitter where meaningful
measurements cannot be made. The default value depends on
the product specification. Adjusting Blanking is optional.
8 Configure Max Change Rate.
Note
Max Change Rate indicates the maximum change rate of
measuring distance or level.
To Next Page
Loading...
