ABB LST300 - Parameter descriptions; Menu: Easy Setup; Menu: Device Info

30 LST300 | COMPACT ULTRASONIC LEVEL TRANSMITTER | LST300–EN REV. E
Parameter descriptions
Menu: Easy Setup
Menu / Parameter Value range Description
Easy Setup
Language English, Chinese Menu language. Only two languages are available.
New languages can be downloaded.
Operation Mode Level Mode
Flow Mode
Volume Mode
Select an operation mode
Empty Distance 

Distance from sensor to the bottom of the measurement range
Span 

Measurement span
Blanking 

Distance from sensor where no measurement is possible
Max Change Rate  Maximum rate the level can change
Menu: Device Info
IMPORTANT (NOTE)
This menu is used only to display the device parameters. The parameters are displayed independently of the configured access
level, but cannot be changed.
Menu / Parameter Value range Description
Device Info
Device
-
Device Version -
Menu / Parameter Value range Description
Device Info / Device
Sensor Type 

Device sensor frequency
Product Code - Product code
Serial No. - Product serial number
Calibration Date - Product calibration date
Calibration Location - Product calibration location
Manufacturer - Manufacturer name
Street - Manufacturer street name
City - Manufacturer city name
Phone - Manufacturer phone number
Menu / Parameter Value range Description
Device Info / Device Version
Transmitter Firmware Version - Firmware revision of the field device
Transmitter Hardware Version - Electronics hardware revision of the field device
Transmitter Bootloader Version - Software revision of the electronics board bootloader
Sensor Firmware Version - Firmware revision of the sensor
Sensor Hardware Version - Electronics hardware revision of the sensor
Sensor Bootloader Version - Software revision of the sensor board bootloader